Peakbagger.com

Ascent of Winston County High Point on 2013-05-10

Climber: David Darby

Other People:Solo Ascent
Only Party on Mountain
Date:Friday, May 10, 2013
Ascent Type:Successful Summit Attained
    Motorized Transport to Trailhead:Car
Peak:Winston County High Point
    Location:USA-Mississippi
    Elevation:722 ft / 220 m

Ascent Trip Report

Peak 6 of 8 today.

Struggled with access here as well. I followed earlier reports to the chicken farm and spoke with people there. Access denied (private property). So, I drove around to Plattsburgh Rd and parked at a logging road access (lots of clear cut on that side). The old logging road went right into an old ATV trail and right up to the summit (lucky me).

I thought I had arrived at the summit, but when I double checked my gps coordinates I realized I was 200M short. I continued to follow the atv route and then found the real summit.

I didn't realize I left my gps at the chicken farm, so the route shows the drive around to the east access location rather than my actual hike :-(.
Summary Total Data
    Total Elevation Gain:122 ft / 37 m
    Round-Trip Distance:2 mi / 3.2 km
    Route:Loggin road to ATV trail
    Trailhead:Plattsburgh Road  600 ft / 182 m
    Route Conditions:
Road Hike, Unmaintained Trail
    Weather:Pleasant, Calm, Partly Cloudy
Wet, muddy
Ascent Statistics
    Time:20 Minutes
Descent Statistics
    Time:15 Minutes
GPS Data for Ascent/Trip


 GPS Waypoints - Hover or click to see name and lat/long
Peaks:  climbed and  unclimbed by David Darby
Click Here for a Full Screen Map
Note: GPS Tracks may not be accurate, and may not show the best route. Do not follow this route blindly. Conditions change frequently. Use of a GPS unit in the outdoors, even with a pre-loaded track, is no substitute for experience and good judgment. Peakbagger.com accepts NO responsibility or liability from use of this data.

Download this GPS track as a GPX file




This page has been served 279 times since 2005-01-15.




Copyright © 1987-2019 by Peakbagger.com. All Rights Reserved. Questions/Comments/Corrections? See the Contact Page Terms of Service